Reliance PSL Pressure Limiting Valve 15mm Internal Flare 600kPa - PSLA513

Model: PSLA513

Reliance PSL Pressure Limiting Valve 15mm Internal Flare 600kPa - PSLA513

RMC's PSL Pressure Limiting Valves control inlet supply line pressure to a preset maximum to prevent overpressure situation. The valve remains in the open position if the pressure in the supply line falls below that preset maximum pressure.

PSL Pressure Limiting Valves are ideal for installation with high pressure storage water heaters, water meter assemblies, water softeners etc. RMC's PSL Pressure

Limiting Valves are of an in-line barrel design. PSL Pressure Limiting Valves are available in 15 mm and 20 mm configurations.

• High pressure and temperature tolerances
  Suitable for a wide variety of pressure limiting applications
• Stainless steel seat
  Extended service life
• Dezincification resistant
  Meets Australian Standard for potable water supply
• Suitable for horizontal or vertical installation
  Valve designed to work effectively in either orientation
• Available in a range of fixed outlet pressure settings
  350 kPa, 500 kPa and 600 kPa

RMC PSL Pressure Limiting Valves are suitable for use to limit supply pressure to below the set pressure of the expansion control valve and/or pressure and temperature relief valve on a high pressure storage water heater.

The PSL range valves can be used interchangeably with the PS range.

• Model: PSL50A
• DN Size: 15mm
• Inlet/Outlet Fittings: Internal Flare
• Standard Pressure Settings Available (kPa): 350 kPa, 500 kPa, 600 kPa
• Maximum Inlet Presure: 2000 kPa
• Maximum Temperature:  80° C

Downloads
	PSL Series - Pressure Limiting Valves (in-line or slim design model)