Reliance EB35 Pressure Reducing Valve 20mm Female BSP - PRV3520

Model: PRV3520

Reliance EB35 Pressure Reducing Valve 20mm Female BSP - PRV3520 

The RMC EB35 Pressure Reducing Valve is used in water systems to limit the downstream pressure to the preset maximum. It compensates for fl uctuating upstream pressure to maintain constant maximum outlet pressure.

Features of the EB35 Pressure Reducing Valve make it most suitable for reducing pressure within a higher pressure zone, or at point of use. This allows individual zonal pressure control, as opposed to limiting pressure at the mains supply which may result in poor fl ow in parts of the system. The slim-line design and compact cartridge make this valve the choice where space is limited.

The RMC EB35 Pressure Reducing Valve is available in both adjustable pressure (110 – 550 kPa) and pressure locked at 500 kPa, with 15 mm and 20 mm with female BSP thread connections.

• Simple twist-cap adjuster eliminates need for special tools
  Pressure adjustments are quick and easy
• Reduces pressure in a zone where high pressure and flow can be costly and/or dangerous
  Allows higher pressure to be used elsewhere in the distribution system in large installations
• Simple single piece cartridge based design
  Valve and strainer can be serviced without disassembly and without special tools
• Cutting edge design incorporating Micro-Finger cartridge
  Dissipates noises due to water fl ow across the seat providing a quieter installation
• Integrated gauge port
  Provides convenient access point for testing and setting pressure
• Reduced water consumption
  Improved economy of service with ecological benefi ts

The RMC EB35 Pressure Reducing Valve is for use in residential installations and individual outlets as part of a zonal pressure regulation system. Fitting the valve at the mains supply protects downstream installations from variations in supply pressure. Use of a Pressure Reducing Valve can minimise water wastage.

• Maximum inlet pressure: 1600 kPa
• Maximum supply temperature: 80° C
• Adjustable outlet pressure range: 110 – 550 kPa (500 kPa in pressure locked confi guration)
• Fluid Media: Water, compressed air, fuel oil, neutral non-adhesive fl uids,
  neutral gases
• Width: 74
• Height: 112
• Outlet: DN20

Downloads
	EB35 Series Pressure Reducing Valve Technical Specifications