Wallace Hot Pump EV2-70-2Z HP

Model: EV2-70-2Z HP

Wallace Hot Pump (EV2-70-2Z) (HP)
For domestic hot water (supplied with unions)  

Installation & Operating Conditions:
Pump must be used only in clean water service without any solids, grit, or dirt. Pump to be installed such that the shaft is in a horizontal position. Pump must be installed in a weatherproof location with proper ventilation and easy access. 

• Motor protection IP42 (must be installed in weatherproof location)
• Maximum temperature for open systems (65°C)
• Minimum static head for closed systems must be 2.5m or more for temperatures up to 80°C, 5.0m or more for temperatures up to 95°C and 18.0m or more for temperatures up to 110°C