Dux Secura Rain-Green Polybutene Pipe 20mm x 25m Coil - N4PC25G

Model: N4PC25G

Polybutene – 1 (PB-1) resins are high molecular weight isotactic, semi-crystalline thermoplastic polyolefin’s produced through the polymerisation of Butene-1 and Ethylene, and/or Propylene co monomers.
PB-1 combines the typical characteristics of Polyolefin’s with a unique property mix of high flexibility and outstanding creep resistance over a wide temperature range. Due to a similar molecular structure, PB-1 is very compatible with PP and Propylene based thermoplastic elastomers. It is easily dispersible in PE notwithstanding its limited molecular compatibility. Secura PB-1 is extruded from grade 4267 PB-1 resin manufactured by Lyondell Basell.

• Dux Secura Rain-Green Polybutene Pipe 20mm x 25m Coil - N4PC25G
• Potable Rainwater Only

WATER IS PRECIOUS AND SMARTER USE WILL HELP TO CONSERVE THIS RESOURCE.
Local authorities are encouraging the installation of suburban rainwater storage systems for watering the garden and washing cars to help reduce the wasteful demand on town mains supplies. These urban rainwater systems when connected to a home’s plumbing system can either replace or supplement the town mains supply reducing costs and inconvenience of not having water during times of shortage.

NOTE: PB-I IS NOT UV RESISTANT AND MUST BE COATED OR SHEATHED TO PROTECT FROM DIRECT SUNLIGHT.

HOW WILL A RAINWATER STORAGE SYSTEM HELP ME?

• It will reduce your bills if your current water supply is metered.
• It can reduce reliance on the town mains supply and reduce inconvenience during water restrictions.
• It will help preserve a valuable asset

SecuraRain™ pipe is manufactured according to AS/NZS 2642.2 requirements and can utilise the full range of solid brass SecuraGold fittings with absolute confidence

DO I NEED A DIFFERENT PIPE FOR A RAINWATER SYSTEM?
Yes. If your home is supplied from the council water main and you wish to connect a supplementary supply from a rainwater storage tank or bore to your home’s plumbing system then that pipe system and outlets must be clearly identified as ‘Rainwater'

ARE THERE ANY SPECIAL CONDITIONS FOR INSTALLATION?
Yes. Installation must avoid cross contamination so special requirements are detailed in AS/NZS 3500.1.2003.

WHAT SIZES ARE AVAILABLE?
SecuraRain™ piping is now available in 15mm and 20mm sizes with a pressure rating of 1600kPa to cater specifically for these installations.

Dux SecuraGold™ Plumbing Fittings & Polybutene-1 Pipe

Downloads
	Dux Secura Technical Manual
	Dux Secura Lilac and Rain Brochure
	Dux SecuraGold Range