Continuous Flow Controller - Deluxe Bathfill Controller

Model: BC100V

The Rinnai Bathroom Deluxe Controller will run a bath for you, turn off the water, then tell you when it's ready. Also ideal as a water saver—the volume of water to be used in the shower can be set.

Digital controllers allow you to select the exact temperature of the hot water at the outlet. 

This has a number of benefits:

• Safety, especially if you have young children, the hot water can be pre-set to a child-safe level
• No need to mix hot and cold water, this reduces the affect of temperature spiking when another tap in the building is turned on
• You use your continuous flow unit more efficiently as less gas is required to heat water to 40 °C (typical shower temperature) than at 55 °C (default temperature without controllers)
• Highlights any problems (disruption in gas supply etc.) by displaying error codes on the controller

Extended warranty Rinnai Infinity installations with a Rinnai controller receive an extended warranty.

Domestic installations with a Rinnai Continuous Flow Water heater installed, refer compatible water heater models below.

Each remote controller can be individually programmed, however the water heater cab only deliver one set temperature at any time.

Rinnai water controllers cannot be used with Rinnai Infinity Solar units.

Positioning
Deluxe controllers are water resistant, however, durability is improved when positioned outside the shower recess. All deluxe water controllers must be installed at least 400 mm above the highest part of a sink, basin, or bath.

Compatible with the following Rinnai water heater models