Reliance HeatGuard Solar HF (Orange) 20mm Tempering Valve - MIX11511
Model: MIX11511
Reliance HeatGuard Solar HF (Orange) 20mm Tempering Valve - MIX11511
RMC's HeatGuard Solar HF is a High Flow tempering valve that mixes hot water with cold water to deliver tempered water at a constant temperature throughout an entire house, building or system. The HeatGuard Solar HF is suitable for high fl ow, large capacity applications and for low pressure environments. HeatGuard Solar HF has been specially engineered to withstand the extreme thermal demands of solar heating applications. The HeatGuard Solar HF is suited for low pressure, high fl ow environments such as gravity fed and tank supplied solar water heater installations. HeatGuard Solar HF is available in a 20 mm confi guration.
-
High thermal endurance
Will endure the extreme temperatures present in solar installations -
High Flow design
Designed especially for use on high fl ow, large capacity systems with reduced head loss -
Union Connections
Valve easy to install and easy to remove for servicing of strainers -
Performance
More accurate control of outlet temperature – safer installations -
Strainers upstream of checks
Protects valve and check valves from impurities in the water supply -
Tamper-proof adjustment
Special adjuster key eliminates chances of accidental adjustment -
Dezincification resistant
Meets Australian Standard for potable water supply -
Individually tested and calibrated
Every valve is tested to ensure higher quality and performance
RMC's HeatGuard Solar HF is a High Flow tempering valve for use in solar hot water distribution systems. Fitting the valve at the hot water source ensures the delivery of constant temperature hot water throughout the system.
DO NOT USE on steam supplied systems.
Cold water supply temperature: | 5° C - 30° C |
Hot water supply temperature: | 60° C - 99° C |
Optimum outlet temperature range: | 40° C - 50° C |
Set temperature: |
Must be commissioned on site to achieve desired outlet temperature
|
Accuracy of outlet temperature: | ±3° C - tested to AS4032.2 between 40° C and 50° C |
Minimum temperature differential (between hot supply
and outlet temperature):
|
15° C |
Supply pressure, static: | 1600 kPa maximum |
Minimum flow rate: | 4 litres/min. |
Downloads | |
HeatGuard HF Technical Specification Sheet |