Neo Inbuilt Gas Fire ETR
Model: RIB2311ETR
Designed with versatility in mind. It can be placed in renovations or new builds.
This is the Electronic model.
RRP $3,779 - Includes ETR engine and frame—ordered separately. This is indicative pricing only, price will vary according to model type (manual or ETR), type of installation, and framing option selected.
The Rinnai Neo™ gas fire range combines modern good looks with the latest advances in technology. Impressively it's the first natural draft gas fire available in New Zealand with a greater than 4-star energy rating across all installations.
The ENERGY STAR® mark identifies New Zealand's most efficient products and appliances.
Efficient
A major benefit of the Neo's 4.1 star rating is that it won't burn a hole in your pocket. With Neo's advanced design, you'll require less energy to heat your room—which means lower running costs.
Innovative
A choice of designer framing options are available, so you can individualise your fireplace to complement your décor.
Versatile
Choose from a base model with a discrete manual control or a full featured model with Electronic Timer Remote (ETR).
Suitable for : Living rooms and open plan areas. Heating area 69-107 m² (depending on gas type and where you live in NZ).
- LPG up to 93 m²
- NG up to 107 m²
Gas type : Available for Natural Gas or LPG. Specify gas type at time of purchase.
General clearances
The appliance must not be installed where curtains or other combustible materials (coffee tables, couches etc.) could come into contact with the fire. In some cases curtains may need restraining. The 1000 mm clearance above is the clearance to the ceiling. The 400 mm side clearance includes side walls.
| NG | LPG | |
| Input: | 14-30 MJ/h | 14-27 MJ/h |
| Output: | 3.24-6.94 kW | 2.98-6.04 kW |
| Efficiency: | 80% | 80% |
| Heating Area: | up to 107 m² |
up to 93 m² |
| Data plate | Inside the appliance on the front left hand side |
| Flue: decorative(mock chimney) | Natural draft twin-skin flue. An approved 100 mm cowl must be fitted to all installations. Decorative chimney installations require a Rinnai Zero Clearance Box and Flue Kit. Flue dimensions; outer 150 mm, inner 100 mm. |
| Flue: masonry | Rinnai strongly recommends the use of a Rinnai flexiliner flue system (flexi Ø 100 mm). Failure to meet this criteria may result in an unsafe situation. Installation without a flexiliner flue is permissible as long as the chimney is checked for soundness and ability to achieve a good draw. |
| Gas connection | ½ " BSPT, the gas supply terminates inside the heater at the front lower right hand side of the appliance. |
| Ignition | Continuous spark electronic ignition |
| Noise level | 37-45 dB(A) |
| Power consumption | High 50 W, standby |
| Safety devices | Overheat switch, electrical fuse, flame failure sensing system, and power failure protection. |
| Weight | 60 kg |
| Market release | 2011 |
| Compliance |
ES: Supplier Declaration of Compliance • Declaration Number: 123912011 • Certificate Number: 7707 |
| Masonry (mm) | Mock Chimney (mm) | |
| A | 865 mm | 865 mm |
| B | 660 mm | 660 mm |
| C | 359 mm | 363 mm |
| D | 62 mm | 62 mm |
| E | 691 mm | 795 mm |
| F | 589 mm | 650 mm |
| G | - | 280 mm |
| H | 305 mm | 305 mm |
| I | 45 mm | 45 mm |
| J | 235 mm | 240 mm |
This is considered a flush installation, only the frame protrudes from the enclosure (sits out approximately 20mm from the wall).
