Rinnai Recess Box - Composite
Model: R1406
The Rinnai Composite Recess Box is an affordable alternative to the Rinnai Metal Recess Box for housing your Rinnai Infinity unit, pipe work and power supply, and can be painted to match your house.
The composite recess box enables a Rinnai external continuous flow gas water heater to be partially recessed into an external wall, covered and out of sight. It is designed for new build installations as installation needs to commence during the framing stage, before internal linings, claddings or building wrap is applied.
The unit protrudes approximately 120 mm from the framing it is mounted to. The protrusion from the finished wall will depend on the cavity depth (if any) and the cladding thickness.
- New construction, installation needs to commence during the framing stage and before internal linings, claddings or building wrap are applied
- A minimum framing depth of 88 mm
- Installation with Rinnai Infinity external VT16-VT26 and XR16-XR26 continuous flow gas water heaters
It is not suitable for fire rated walls.
Brick installations
Please contact us as customised installation instructions will need to be sent.
Building code compliance
Territorial authorities may have their own additional requirements regarding this type of installation. If in doubt over compliance with building codes, it is advisable they are consulted prior to installation.
